- Fire Safety Systems
- +371 25660980
- [email protected]
- Mon - Sat 9.00 - 17.00
- Sun CLOSED
They are intended for installation in general ventilation installations. It is possible to make dampers in the ex version.
These cut-off dampers are designed for use in comfort ventilation installation, in points of penetration of these installations through vertical and horizontal building partitions. They are installed in systems with increased acoustic requirements.
These cut-off dampers are designed for installation in general ventilation systems, at the point of penetration of these installations through building partitions.
These cut-off dampers are designed for installation in automatically-activated fire ventilation systems. They support single fire zones, as well as several zones within a single facility. They prevent propagation of fire, smoke and fire gases to the neighbouring zones.
Blast ventilation systems are used to smoke off underground garages as an alternative to traditional duct systems. All devices included in the mcr j-FLO system are approved for use in construction in fire protection.
MCR LAM louvered vents are part of natural smoke exhaust system, with principal purpose of removing hot fire gases outside building. Louvered vents produced by MERCOR are available in wide range of dimensions, types of control system and making options. mcr LAM louvered vents are conformant with the normative PN-EN 12101-2.
MCR LAM-N louvered air inlet flaps are one of the main elements of gravity exhaust system as self-acting device according to norm PN-EN 12101-2
The fans are used in fire ventilation systems for smoke extraction or aeration, they can also be used in ventilation systems as supply or exhaust fans.
Mcr PROLIGHT roof hatches are devices that enable roof exit to perform service or maintenance work. Proper selection of the leaf filling also allows the interior of the building to be illuminated with natural light.
The main function of light bands is to provide natural light to the interior of the rooms. The bands equipped with smoke exhaust and/or ventilation dampers of the mR PROLIGHT line additionally constitute an important element of the gravitational smoke ventilation system and / or daily ventilation.
The mcr PROLIGHT spotlights provide a source of natural lighting for the rooms in the building. They are used in various types of large-area facilities, such as industrial or storage halls and on the last floors of multi-storey buildings.
Light strips illuminate rooms in buildings with natural light. They are used primarily in: industrial buildings, production and storage halls, atriums and communication routes of shopping centers.
The main function of ventilation flaps is to provide daily ventilation of buildings and rooms. A wide range of variants and additional equipment makes our product applicable in various types of facilities.
Mcr PROROOF roof hatches have been designed to allow safe, quick, uncomplicated and easy roof access. In configurations with a transparent filling, the mcr PROROOF leaves allow additional lighting of the room with daylight.
Smoke curtains are one of the elements of the gravitational smoke removal system. Their main task is to separate smoke zones in the facility. Smoke zones, in turn, stop the uncontrolled spread of smoke, which allows the smoke-free layer to be maintained in the space above the floor. Correctly designed and installed smoke curtains optimize the flow of smoke and direct it towards the smoke vents.
mcr PS collar is used for fireproofing: flammable pipes up to Ø250 mm, flammable pipes in flammable insulation up to Ø250 mm, non-flammable pipes in flammable insulation up to Ø160 mm, flammable pines at an angle up to Ø160 mm and flammable pipes in combined penetrations.